Sand Blasting Machines for Sale in Philippines and Iran

Sand Blaster for Sale
Sand Blaster for Sale

Sand Blasting Machine for Sale
Sand Blasting Machine for Sale

Sand blasting machines are our hot-selling products of YG Machinery, and many units are sold every month. In these three months, more than 10 countries have been sold, including the United States, Malaysia, Japan, the Philippines, Colombia, Pakistan, Nigeria, Thailand, South Africa, Panama, Sweden, Romania, Vietnam, Iran, and so on. Our customers are all over the world, please trust us YG Machinery must be the best quality and the best price. If you are interested, please don’t hesitate to contact us immediately.

Sand Blasting Machines Application:

Sand blasting technology is widely used in the fields of ships, bridges, hydraulic engineering, mining machinery manufacturing, petroleum, chemical metallurgy, port construction, light industry, aircraft manufacturing, rolling stock, instruments and meters, precision manufacturing, electronics industry and other fields; It is the best way to clean the large area before coating the metal surface. For non – coated surface can achieve surface reinforcement, light and sculpture.

Get a Free Quote

Sand Blasting Machine Parts
Sand Blasting Machine Parts

Sand Blasting Machine with Cheap Price
Sand Blasting Machine with Cheap Price

















Sand peening capacity





Air source configuration





Control System

Air control

Air control

Air control

Air control






Working Principle:

The spray technology can be divided into three types: press-in, suction and centrifugal. In the press-in type, compressed air and abrasive are sprayed while mixing in the same container, so that the compressed air is fully utilized, and the air flow and sand flow are easy to adjust, and the ideal mixing ratio ( air and abrasive ) can be obtained. High efficiency, low energy and abrasive consumption, wide use, suitable for large area cleaning, etc. Are the biggest features of the press-in type.

Sand Blasting Machine Function:

Sand blasting machine is a machine that can make all kinds of abrasives ( silica sand, copper slag, iron sand, etc.) spray on the metal surface by air pressure. The abrasive sprayed on the metal surface grinds on the metal surface to remove surface impurities and oxide layers, increasing the surface area, which can improve the surface adhesion of the coating and improve the coating quality of the coating.

Get a Free Quote

Sand Blasting Machine Features:

  1. Simple operation: ordinary workers can operate the machine skillfully after half an hour of training, and there is an advanced automatic control system to prevent workers from misoperation.
  2. High production efficiency: the average daily processing capacity of a frozen blasting machine is equivalent to the blasting workload of 50-80 skilled workers.
  3. High blasting accuracy: it can remove very small and hidden flash, without being restricted by the shape of the product, high pass rate and stable blasting quality.
  4. Can remove the complex structure, any shape of small rubber and plastic alloy products, brittle plastic products and magnesium alloys, zinc alloys, aluminum alloy castings flash.
  5. Do not damage the surface of the product, improve the appearance quality of the product, and increase the service life of the product.
  6. It occupies a small area, and a sand blasting machine plus auxiliary equipment only needs 10 square meters.

Sand Blasting Machine Safe Operating Procedures:

  1. The air tank, pressure gauge and safety valve of the sand blasting machine should be checked regularly. Dust is discharged from the gas storage tank once every two weeks, and the filter in the sand tank is checked once a month.
  2. Check whether the sandblasting machine ventilation pipe and the sandblasting machine door are sealed. Five minutes before work, the ventilation and dust removal equipment must be started. When the ventilation and dust removal equipment fails, the sand blasting machine is prohibited to work.
  3. Protective equipment must be worn before work. Bare arms are not allowed to operate the sandblasting machine.
  4. The compressed air valve of the sand blasting machine should be opened slowly, and the air pressure must not exceed 0.8Mpa.
  5. The size of the sand blasting should be compatible with the requirements of the work, generally between 10 and 20, and the sand should be kept dry.
  6. When the sand blasting machine is working, it is forbidden to approach by unrelated personnel. When cleaning and adjusting the running parts, stop the machine.
  7. Do not blow dust on the body with compressed air from a sandblaster.
  8. After work, the ventilation and dust removal equipment of the sand blasting machine should continue to run for five minutes and then shut down to exhaust indoor dust and keep the site clean.
  9. Personal and equipment accidents should be kept on-site and reported to relevant departments.
Sand Blasting Machine Manufacturers
Sand Blasting Machine Manufacturers

Application of Sand Blasting Machine
Application of Sand Blasting Machine

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name(required):

Your Email(required):

Your Phone(required):

Your country:

Your Whatsapp(required):

Your Message(required):

2 thoughts on “Sand Blasting Machines for Sale in Philippines and Iran”

  1. Hi, I do think this is an excellent blog. I stumbledupon it 😉 I am going to revisit once again since i have book-marked it. Money and freedom is the best way to change, may you be rich and continue to guide other people.


Leave a Comment