Pass Through Shot Blasting Machine | Wheel Blasting Shot Systems

Pass-through Monorail Shot Blasting Machine Price

The pass-through shot-blasting machine is the most extensive type of shot-blasting machine for shot blasting machines. Pass through shot blasting machine is suitable for de-stressing and surface descaling of steel, angle steel, rebar, metal structure weldments, steel products, railway vehicles, construction machinery, and bridge manufacturing. It can apply strong shot blasting to the surface of the steel in its original state, remove the rust layer, and obtain a uniform and uniform metallic luster surface to remove stress and improve the steel structure and the surface finish quality and corrosion resistance of steel. In addition, we also have sandblasting chambers, sandblasting rooms, floor shot blasters, portable sandblaster machines, rebar de-rusting machines, hanger shot blasting machines, etc. that can be used for de-rusting. Contact us to know more. 【WhatsApp/WeChat/Phone/Skype】+86 136 1385 6800

Get a Free Quote

Pass-Through Shot Blasting Machine Parameter:

Parameter	YG-698	YG-6912	YG-6915	YG-6920	YG-6925	YG-6930	YG-6940
The effective cleaning width(mm)	800	1200	1500	2000	2500	3000	4000
The room feed-in size(mm)	1000*400	1400*400	1700*400	2200*400	2700*800	3200*800	4200*400
The length of cleaning The workpiece (mm)	1200-12000	1200-1600	1200-12000	1200-12000	3000-12000	2400-12000	4500-18000
The speed of the conveyor (m/min)	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4
The thickness of the cleaning steel sheet(mm)	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-100
The section steel specification(mm)	800*300	1000*300	1500*300	2000*300	2500*700	3000*700	4000*300
The quantity of shot blasting(kg/min)	4*180	4*250	4*250	6*250	6*250	6*360	8*360
The first enclosed quantity(kg)	4000	4000	4000	4500	4500	8000	11000
Roll brush adjusting height(mm)	200	200	350	450	600	850	900
Total power (kW)	90	78.3	113.5	156.6	204.8	224.55	293.6
Airness size(m3/h)	22000	17560	19000	19550	27758	28050	38000

Get a Free Quote

Pass Through Type Steel Plate Shot Blasting Machine — Pass-Through Type Steel Plate Shot Blasting Machine

Application Scope of Pass-Through Shot Blasting Machine:

It is mainly used for the surface smoothing and scratch treatment of metal workpieces such as stainless steel, aluminum steel, and aluminum panels, and the surface cleaning and surface strengthening treatment of metal workpieces in cast pipes, steel pipes, petroleum, and chemical industries. It can also be used for surface strengthening, surface cleaning, surface pretreatment, removal of rust, oxide scale, least, impurities, dirt, and other surface residues of steel structures, steel sections, sheet metal, and other metal workpieces, resulting in appropriate roughness to meet the demand. Degree and matte surface, increase the adhesion of the surface of the metal workpiece.

YG Pass-Through Shot Blasting Machine Features Introduction:

The use of a pitless structure makes installation and maintenance convenient and reduces investment costs.
The utility model has the advantages of a compact structure, high production efficiency, good cleaning quality, safe and reliable work, and stable operation of the equipment.
It adopts a high-quality and high-efficiency blasting machine with a variable frequency speed regulation function, which can control the shot blasting force to meet the surface cleaning requirements of workpieces with different thicknesses.
The angle of the projectile can be adjusted, and the cleaning area is flexible.
It is equipped with a fully automatic monitoring system to monitor the working condition of each transmission part at any time. If an abnormal situation is found, it will automatically alarm and prompt.
The lower shot is controlled by automatic pneumatic control, which can control the number of shots freely, enduring the perfect cleaning effect.
The workpiece conveying speed can be adjusted by frequency to meet different production efficiency requirements.
The whole electrical system adopts “PLC” centralized control and the performance of the main components is relatively stable.

Get a Free Quote

Steel Plate Shot Blasting Effect in YG Machinery

Application of YG Pass-through Shot Blasting Machine

Shot Blasting Principle:

The shot blasting is performed by the impeller rotating at a high speed, and the abrasive at the center of the impeller is pre-accelerated by a regulator and an impeller and is sent to the blade area to throw the abrasive at a high speed, and the speed can exceed 100m/s. due to the large coverage of shot blasting, there is no need to use air pressure, and the energy efficiency is higher than sandblasting. Shot peening is used to improve the fatigue strength of workpieces subjected to high stress and alternating stress. Shot peening has replaced a wide range of other time-consuming and expensive processes, enabling the design of lower-cost and lighter-weight parts. Shot peening is used to improve the workpiece. Physical performance has played a significant role.

Shot Blasting Strengthening Features:

The steel shot is thrown onto the surface of the workpiece without compressive stress and tensile stress, obtaining a regional distribution of pressure and tension. Through surface strengthing, the stress can be made uniform, and the shot peening hardening is especially weakened, and the surface tension is weakened, which is why shot peening can improve the fatigue strength of the metal.

Shot Blasting Pretreatment-refurbishment and Transformational:

In the painting industry, the shot blasting machine is used for the surface pretreatment of the workpiece, such as radiators, cylinders, steel drums, containers, drums, pipes, drums, etc., to ensure the perfect adhesion of paint on the workpiece. Shot blasting is also used to remove old paint before new paint is applied.

In addition, large cleaning rooms with wheels and shot peening can be used for mechanical de-rusting or refurbishment of large work items such as welded steel structures, freight cars, ship plates, and railway vehicles.

Get a Free Quote

Pass-Through Shot Blasting Machine Manufacturer – YG Machinery

Henan YG Machinery has more than 15 years of manufacturing and export experience. our different types of machines that can be suitable for many engineering projects. Products are exported all over the world and are well received by customers. CE, ISO 9001, and strict production policies guarantee the high quality of our products, convenient for export. Customer service staff is available 24 hours a day and provides free technical support. We offer factories and competitive R&D technical teams at competitive prices. Our company sells a variety of mechanical equipment to meet your needs. Engineers can guide the installation and handling of other issues. We offer OEM&ODM services to meet all your requirements. If you are interested in our machines, please contact us in time.【WhatsApp/WeChat/Phone/Skype】+86 136 1385 6800