Vibratory plate compactor are mainly used for compacting engineering foundations and road surfaces in highways, municipalities, and construction. It is suitable for groove backfill foundation, asphalt compaction, floor brick compaction, etc. It has compact structure, beautiful appearance, convenient movement, high work efficiency, good tamping effect, stable operation and labor saving. Vibratory plate compactor can be divided into electric plate compactor and gasoline plate compactor.
Vibratory Plate Compactor Working Principle:
The vibrating plate compactor is mainly suitable for the bonding between the tamping particles and the material with less friction. The main working parameters of the vibrating plate are: the bottom area of the working plate, the mass of the whole machine, the exciting force and the excitation frequency. Under normal circumstances, the floor area of the same type of plate compactor is similar, so the performance of the plate compactor impact cymbal is mainly affected by the quality of the whole machine, the exciting force and the excitation frequency. The exciting force is mainly used to maintain the forced vibration of the material to be compacted; and the excitation frequency affects the compaction efficiency and the degree of compaction. That is, under the same exciting force, the higher the excitation frequency, the higher the compaction efficiency and compactness high.
Electric Plate Compactor
Gasoline Plate Compactor
Gasoline plate compactor are used in roads, municipalities, buildings, water conservancy and other fields to build roads, streets, buildings, canals and bridges. It is also suitable for the compaction of narrow foundations.
Plate Compactor Features:
- The gasoline plate compactors adopts the vibration-proof operating armrest, which is foldable and detachable. At the same time, it has excellent anti-vibration measures, even if it is working for a long time, it will not fatigue.
- The gasoline plate compactor is equipped with a high-reserve four-stroke engine, which has low fuel consumption, low noise and excellent durability. It has an oil sensor device, and it has an automatic stop function when the engine oil is insufficient.
- The gasoline plate compactor is equipped with a mobile transport wheel to make the movement between the sites convenient and easy.
- Gasoline plate compactor is equipped with the largest capacity water tank in the same class of products, without the need for tools.
- Gasoline plate compactor fully sealed pulley shell adopts special injection molded parts, which makes the material lightweight and improves the strength and heat dissipation, and prevents dust stones from entering, improving the life and durability of the belt.
- Gasoline plate compactor with spheroidal graphite iron plate with round edge, tough, wear-resistant, self-cleaning function, high work efficiency.
Check Before Use:
- Check the appearance of each part of the fixing screws for looseness and missing.
- Check the amount of oil on the dipstick scale( motor oil).
- Check the amount of gasoline in the mailbox.
- Check if the fuel tank switch is off.
- Check that the sponge air filter is clean and dirty and must be cleaned.
How to Check They Can’t Work:
- Check the amount of fuel in the tank.
- Check if the fuel tank switch is in the open position.
- Check the amount of oil.
- Check that the air filter element is clean.
- Check that the throttle handle is open to the large throttle position.
- Check if the flameout power switch is off.
- Check if the spark plug high voltage line plugged in.
- Remove the spark plug to check if the gasoline in the cylinder has passed, and pull the starting rope to idle to remove excess gasoline.
- Replace the spark plug ( remove with a special sleeve).
- Check if the fuel filter at the lower end of the fuel tank switch has dirt and oil.
- Still can’t start the internal engine problem.
Precautions for Use:
- To be added to the fuel tank, the gasoline drum must be clean. There should be no sand, debris, water, or other oil in the fuel tank.
- Oil shall not deteriorate, such as water, oil aging for a long time to use, timely replacement of problems.
- When starting the engine to pull the drawstring, do not use excessive force, as long as you feel the resistance in the pull, and then pull it hard at this position, it will start; then gently send the start pull handle back.* Winter start can be semi-opening damper to increase the concentration of gasoline and air to facilitate start-up, must be turned on after starting.
- After the engine is started, do not open the throttle too much, open 80%, because the engine is easy to damage due to long working temperature.
- Do not vibrate in the ground on hard ground and already working surface. Hard to hard will cause damage to the implement.
- The lime soil working surface is sturdy before the water is sprayed, and the surface is not stuck to the tamping, and the tamping effect is achieved.
- When working on cement concrete surface or stable layer, the appearance of the machine must be cleaned after use, and the cleaning will not be cleaned after solidification to affect the appearance.
Plate Compactor Maintenance:
- Since the engine is too dusty from the ground during the operation of the plate compactor, the air filter must be cleaned every day.
- Check the oil quantity before work, find that it is thick or black, it must be replaced, and ensure lubrication to prevent damage to the machine.
- Check the belt tightness.
- Check the appearance: dirty, loose, leaky, missing, loose, and the problem must be rectified.
Henan Yugong Machinery Co.,Ltd located in Zhengzhou,Henan province,China.Its a large engineering machinery manufacturing enterprise which focus on research and development, production and sale kinds of machines.
We insist on the strategy of technology research and development. Technical design, material purchasing, precised manufacturing and strict quality inspection are all processed according to the ISO9001 standard. Sincerely hope we can establish close,trustworthy and long term relationship with each customers. Any interests and needs about our machines,please contact us.