Top, Professional and Reliable Manufacturer of Various Machinery – YG Machinery
Gypsum Spray Plaster Machine
Gypsum Spray Plaster Machine
Mortar Wall Plaster Machine
The automatic gypsum spray plaster machine integrates the functions of feeding, mixing, pumping, and spraying, and is suitable for the construction of various ready-mixed dry-mixed mortars with different characteristics and uses, such as lime-based, gypsum-based, and cement-based plaster, masonry Construction mortar, thermal insulation mortar, repair and bonding mortar, self-leveling mortar, etc. We also have mortar spraying machines, shotcrete machines, GRC machines, and wet shotcrete machines for spraying use. Want to know more machine details? Contact us now!【WhatsApp/WeChat/Phone/Skype】+86 136 1385 6800
Multi-function spraying machine, suitable for pumping all ready-mixed dry mixing mortar, such as self-leveling mortar, plaster mortar, lime plaster mortar, cement mortar, lime and cement mortar, polymer mortar, plaster cement mortar, clay mortar, insulation materials, grouting mortar, fireproof mortar, floor mortar, seaweed mud, thermal mortar, putty, bottom coating, wall painting, masonry mortar, etc.
Gypsum Wall Plaster Machine Features:
Reasonable design, integrated pump, and compressor, easy to move.
Continuous feeding, no pulse phenomenon, uniform spraying, and strong adhesion.
There is no floor ash, saving water and materials, which can reduce the cost by more than 20%.
The nozzle and the nozzle are universally connected, and the yin and yang corners and the top plate can be sprayed freely, which is convenient.
Wide applicability, one machine with multiple functions, can spray plaster, putty, mortar, fireproof coating, refractory materials, etc., and is not affected by the area and environmental conditions and the shape of the sprayed surface.
Check the Mortar Wall Plaster Machine Operation Guide:
Turn on the power, press the button, and the screw pump will start to work. If the steering is reversed, adjust the power supply after pressing the stop button to stop, and change the steering, and there will be no material in the reverse direction.
Inject a small amount of water into the inlet of the conveying hose, or use a screw pump to pump water to wet the conveying hose, and gradually discharge the water in the pipe from the outlet.
Put the uniformly stirred material into the hopper, press the start button, and the spraying work can start, and the spraying quality can be adjusted by adjusting the air volume.
Stirring materials must be continuously added to the hopper so that the gypsum can be sprayed continuously.
After the spraying is completed, the material in the hopper should be sprayed before stopping the machine. Remove the spray head take the parts apart and clean them one by one.
Pour 50 kg of clean water into the hopper, start the pump to clean it, and when clear water flows out of the nozzle, remove the delivery hose and roll it up.
