Top, Professional and Reliable Manufacturer of Various Machinery – YG Machinery
Pavement Grooving Machine
Pavement Grooving Machine
YG Pavement Slotting Machine
The pavement grooving machine is mainly used for the grooving of asphalt and cement pavement cracks. Quickly arrange irregular cracks into uniform grooves with special blades to form new joint faces. Optimize the contact layer between the potting material and the slot to enhance the tightness of the joint between the potting material and the sidewall of the slot.
It is powered by a powerful Honda gasoline engine, which drives the spindle to rotate at a high speed through a V-belt. The hand-cranked lifting hand wheel lowers the main shaft and cuts the crack. The front wheel uses a universal wheel so that the whole machine can follow the crack in the work. The naturally formed curve is grooved, and the matched fan page can also be used as a cleaning machine to clean the dust in the tank after the slotting, so as to achieve the purpose of multi-purpose use of the machine, and is a special machine for repairing cracks and grooves of the asphalt pavement.
5 Features of YG Road Grooving Machine:
Gasoline engine power, flexible movement, free from power restrictions.
A universal wheel design can change the slot angle arbitrarily with the direction of the crack.
The flattening frame adopts thickened material to ensure the strength of the whole machine.
A variety of blade options can cut out different shapes of the incision.
It has the advantages of small size, flexible travel, reliable work, and high efficiency.
The Pavement Grooving Machine Safe Operation Sequence:
Before starting the machine, you must carefully check whether the tool and nut and the screws of each part are firm. If looseness is found, it must be tightened in time.
Pay attention to the cutting direction when installing the tool, and do not reverse it.
The main tool is turned clockwise.
Before feeding the groove, first, confirm whether the pneumatic device is open and press the workpiece on the movable push table and close the positioning plate, and the hand is not allowed to approach the knife edge.
When the machine fails, the power should be cut off immediately, and the operation should be stopped. A special person should be sent to make repairs and adjustments, and the machine tool cannot run sick.
Before processing, the material should first check whether there are nails, sandstone joints, etc. On the tool to prevent damage to the tool joints and fly out.
The machine must be turned off, the lubricant is cleaned, and the saw blade and knife scraps are removed.
The machine tool must be operated, adjusted, and repaired by the designed personnel. It is strictly forbidden for those who are unfamiliar with the machine tool.
Workers should wear protective equipment such as earplugs and eye protection when operating.
The maintenance of the machine is carried out in accordance with the “Operation, Maintenance and Maintenance System”.
