Top, Professional and Reliable Manufacturer of Various Machinery – YG Machinery
Wheel Washing Machine
Wheel Washing Machine Price
Engineering Car Washing Machine
The construction wheel washing machine is designed according to the requirements of the municipal, road administration, construction committee, environmental committee, transportation, and other departments for the construction vehicles. It is designed for the tires and chassis of various engineering vehicles. The equipment uses a multi-directional high-pressure water gun to carry out the tire and chassis parts. High-pressure flushing, so as to achieve the effect of thoroughly washing the wheel and the chassis, and meeting the requirements of various departments. The washing machine uses mechanical automatic induction, remote control, and manual control to automatically complete the flushing work, and the flushing water can be recycled. When working continuously, only a small amount of water needs to be added, so that a lot of water can be saved. It is especially suitable for the cleaning of incoming and outgoing vehicles in various construction sites, mining workshops, cement products factories, coal mines, power plants, landfills, high-end communities, etc., so as to achieve excellent projects without dust pollution.【WhatsApp/WeChat/Phone/Skype】+86 136 1385 6800
The equipment can completely and completely clean the vehicle body, the chassis, the two sides of the car, the dirt and dust of the tire parts, such as the muck, the mud truck, and the commercial vehicle.
With infrared sensor type automatic opening or manual opening, the selection method is diversified, flexible, and convenient.
Energy-saving and environmentally-friendly water recycling, saving water and saving water resources.
Transport and installation are convenient, and 2 hours can be put into use.
The cleaning process is fast, with no need for personnel to take care of it, and the entire cleaning process is fully automated.
Can adapt to different site sites, the transition is convenient and can be repeated use of the cycle.
Thick steel, can choose different types of equipment according to different environments.
Operating Procedures:
The operator of the wheel washing machine must be trained and familiar with the operation process before the operation.
Before the construction of the washing machine is closed, the sensor and the pedal switch must be normal. The emergency stop switch has been reset. The water level in the pool is within the range of the washable car. There is no idle person in the car wash range.
Close the main power circuit breaker, the power indicator light is on, and the site washing machine enters the standby state.
Before the vehicle enters the washing machine, the driver should be informed of the cleaning procedure, drive the vehicle slowly, not crash quickly, and confirm that the door and window have been closed.
During the operation of the program, the power supply must not be turned off to ensure the orderly operation of the entire car wash program.
Regularly clean the sludge in the sedimentation tank to avoid mixing it into the clear water tank and causing the nozzle to clog.
The operation clearance should be done to clean and maintain the equipment. Check the nozzle and the nozzle for blockage frequently to avoid affecting the cleaning effect.
Turn off the power before performing any cleaning and maintenance.
In the cold weather in winter, the water in the water pipe should be drained after work to prevent freezing.
It is forbidden to wash the car with a water shortage to avoid burning the water pump.
